The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture and hands-on labs, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam. By passing this one exam, you earn CCNA certification. The 200-301 CCNA exam goes live on February 24, 2020.

Audience:

• Target candidates: Individuals seeking the Cisco CCNA certification. The course is also appropriate for support technicians that are involved in the basic installation, operation, and verification of Cisco networks. • Key job tasks: ◦ Configure: Implement the identified solution by applying the planned implementation processes using Cisco IOS commands and applications in the correct order to the selected devices and portions of the network. ◦ Verify: Use the appropriate show commands and applications to ensure that the solution was correctly implemented and is performing as desired. • Job roles: Entry-level network engineer, network administrator, network support technician, and help desk technician.

Event Number: CCNA

Available Languages: English (US)

Subjects: Technical

Course Detail:

Section title
Exploring the Functions of Networking
Introducing the Host-to-Host Communications Model
Operating Cisco IOS Software
Introducing LANs
Exploring the TCP/IP Link Layer
Starting a Switch
Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets
Explaining the TCP/IP Transport Layer and Application Layer
Exploring the Functions of Routing
Configuring a Cisco Router
Exploring the Packet Delivery Process
Troubleshooting a Simple Network
Introducing Basic IPv6
Configuring Static Routing
Implementing VLANs and Trunks
Routing Between VLANs
Introducing OSPF
Building Redundant Switched Topologies
Improving Redundant Switched Topologies with EtherChannel
Exploring Layer 3 Redundancy
Introducing WAN Technologies
Explaining Basics of ACL
Enabling Internet Connectivity
Introducing QoS
Explaining Wireless Fundamentals
Introducing Architectures and Virtualization
Explaining the Evolution of Intelligent Networks
Introducing System Monitoring
Managing Cisco Devices
Examining the Security Threat Landscape
Implementing Threat Defense Technologies
Securing Administrative Access
Implementing Device Hardening

Lab Outline
Get Started with Cisco Command-Line Interface (CLI)
Observe How a Switch Operates
Perform Basic Switch Configuration
Implement the Initial Switch Configuration
Inspect TCP/IP Applications
Configure an Interface on a Cisco Router
Configure and Verify Layer 2 Discovery Protocols
Implement an Initial Router Configuration
Configure Default Gateway
Explore Packet Forwarding
Troubleshoot Switch Media and Port Issues
Troubleshoot Port Duplex Issues
Configure Basic IPv6 Connectivity
Configure and Verify IPv4 Static Routes
Configure IPv6 Static Routes
Implement IPv4 Static Routing
Implement IPv6 Static Routing
Configure VLAN and Trunk
Troubleshoot VLANs and Trunk
Configure a Router on a Stick
Implement Multiple VLANs and Basic Routing Between the VLANs
Configure and Verify Single-Area OSPF
Configure and Verify EtherChannel
Improve Redundant Switched Topologies with EtherChannel
Configure and Verify IPv4 ACLs
Implement Numbered and Named IPv4 ACLs
Configure a Provider-Assigned IPv4 Address
Configure Static NAT
Configure Dynamic NAT and Port Address Translation (PAT)
Implement PAT
Log into the WLC
Monitor the WLC
Configure a Dynamic (VLAN) Interface
Configure a DHCP Scope
Configure a WLAN
Define a Remote Access Dial-In User Service (RADIUS) Server
Explore Management Options
Explore the Cisco DNA™ Center
Configure and Verify NTP
Configure System Message Logging
Create the Cisco IOS Image Backup
Upgrade Cisco IOS Image
Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-shared Key (PSK) Using the GUI
Secure Console and Remote Access
Enable and Limit Remote Access Connectivity
Secure Device Administrative Access
Configure and Verify Port Security
Implement Device Hardening

Pre-Requisite Text:

Before taking this course, you should have:

  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge

There are no formal prerequisites for CCNA certification, but you should make sure to have a good understanding of the exam topics.

No Sessions available at this moment
Please contact your local Training Administrator to schedule this class
Or, Chat With Us in the lower right corner of the page